Operation Manual

COMfortel 1400IP/2600IP/3600IP - Firmware V2.2G - Operation and Configuration V03 07/2015 203
Functions
InterCom OneWay/Speakerphone
Configuring and Operating a Function Key for InterCom Speaker Phone
4. In the list field next to the function key that you would like to define, select the
InterCom speaker phone function.
Note: To change the settings for a function key that already has a function
assigned to it, click on that key.
The current settings for the key assignment are shown in the display.
5. In the Description entry field, enter a description for the key. Possible entries:
Note: The key description is used for printing the label and in the display.
6. In the Operation list field, select one of the following options:
7. In the Account list field, select the account for the required PBX.
8. Enter the required in-house telephone number in the InterCom destination entry
field.
9. In the Permission level list field, select one of the following options:
Further steps:
– Save your settings before you leave the screen.
Requirements for using the function:
Level 1: Keys are assigned on the first key level.
Level 2: Keys are assigned on the second key level.
Up to 64 digits
Numbers and characters
Hold: The key must be held down during the announcement.
toggle: A short press of the key starts the announcement. Another short press
of the key ends the announcement.
User: The function key can be changed by users, sub-administrators and
administrators.
Sub-administrator: The function key can only be changed by sub-adminis-
trators and administrators.
Administrator: The function key can only be changed by administrators.