Operation Manual

COMfortel 1400IP/2600IP/3600IP - Firmware V2.2G - Operation and Configuration V03 07/2015 205
Functions
InterCom OneWay/Speakerphone
Switching InterCom Permission On/Off
10. Tap on Exit.
Requirements for using the function:
– Telephone is a system telephone on an Auerswald PBX or InterCom OneWay is performed
on an Auerswald PBX for which the sequence ##012 has been entered under Settings >
Providers & PBXs > Name of Provider/PBX > Special numbers > Keypad sequence for
InterCom speakerphone.
– InterCom permission is present at the InterCom destination
Switching InterCom Permission On/Off
You can switch InterCom permission on or off as follows:
• Using the telephone
Requirements:
– The telephone is a system telephone in an Auerswald PBX
– Controlling of the PBX via telephone permission assigned in the PBX
For InterCom calls, InterCom permission must be enabled for the system telephone being
called.
Press the function key configured for InterCom permission to switch InterCom permission on
or off.
Alternatively, proceed as described below.
1. Tap on Apps > Functions > InterCom permission.
2. Select one of the following options:
3. Tap on Execute.
Configuring and Operating a Function Key for InterCom permission
Press the key to which InterCom permission has been assigned to switch InterCom permission
on or off, or toggle it.
switch on: Enables InterCom permission.
switch off: Disables InterCom permission.