Operation Manual

208 COMfortel 1400IP/2600IP/3600IP - Firmware V2.2G - Operation and Configuration V03 07/2015
Functions
InterCom OneWay/Speakerphone
Configuring and Operating a Function Key for InterCom permission
5. In the Description entry field, enter a description for the key. Possible entries:
Note: The key description is used for printing the label and in the display.
6. In the Operation list field, select one of the following options:
7. Tap on Assign.
8. Tap on Exit.
Requirements for using the function:
– Controlling of the PBX via telephone permission assigned in the PBX
Up to 64 digits
Numbers and characters
toggle: Press the key to switch InterCom permission on or off depending on
the status.
switch on: Press the key to enable InterCom permission.
switch off: Press the key to disable InterCom permission.