Operation Manual

COMfortel 1400IP/2600IP/3600IP - Firmware V2.2G - Operation and Configuration V03 07/2015 211
Functions
Configuration Switchover (System Telephone)
Configuring and Operating a Function Key for Configuration Switchover
Note: The key description is used for printing the label and in the display.
6. In the Account list field, select the system telephony account.
7. Select in the configuration in the Configuration to activate list field.
8. In the Permission level list field, select one of the following options:
Further steps:
– Save your settings before you leave the screen.
Requirements for using the function:
– The telephone is a system telephone in an Auerswald PBX
– Configuration switching permission granted in the PBX
Using the Telephone to Configure a Function Key for Configuration Switchover
Requirements:
– At least two configurations have been set up in the PBX
1. Tap on Apps > Function keys.
2. Press the function key you want to define.
Note: The LEDs of the function keys that are already filled on one level light
up yellow. If a function key is assigned on both levels, the LED is red.
3. Select one of the following options:
The list of available functions is displayed.
Up to 64 digits
Numbers and characters
User: The function key can be changed by users, sub-administrators and
administrators.
Sub-administrator: The function key can only be changed by sub-adminis-
trators and administrators.
Administrator: The function key can only be changed by administrators.
Level 1: Keys are assigned on the first key level.
Level 2: Keys are assigned on the second key level.