Operation Manual

212 COMfortel 1400IP/2600IP/3600IP - Firmware V2.2G - Operation and Configuration V03 07/2015
Functions
Configuration Switchover (System Telephone)
Configuring and Operating a Function Key for Configuration Switchover
4. Tap on Configuration.
The current settings for assigning the key are shown on the display.
5. In the Description entry field, enter a description for the key. Possible entries:
Note: The key description is used for printing the label and in the display.
6. Select the identification number of the required configuration:
• Manual entry: Enter the identification number in the Configuration to activate
entry field.
• Selection: Tap on and select the identification number based on its name.
7. Tap on Assign.
8. Tap on Exit.
Requirements for using the function:
– The telephone is a system telephone in an Auerswald PBX
– Configuration switching permission granted in the PBX
Up to 64 digits
Numbers and characters