Operation Manual

COMfortel 1400IP/2600IP/3600IP - Firmware V2.2G - Operation and Configuration V03 07/2015 217
Functions
Macro Function
Configuring and Operating a Function Key for the Macro Function
The list of available functions is displayed.
Notes:
The Macro function fills both key levels. If one level has a macro assigned
to it, the other level is also automatically filled with a macro.
Both macros can be executed independently of each other.
If you delete a macro from one key level, the macro is automatically deleted
from the other key level.
4. Tap on Macro.
The current settings for assigning the key are shown on the display.
5. In the Description entry field, enter a description for the key. Possible entries:
Note: The key description is used for printing the label and in the display.
6. In the Account list field, select the required account.
7. In the Macro (Level 1) entry field, enter the macro for key level 1. Possible entries:
Notes:
If you want to configure a programming function on the PBX as a macro,
enter a pause between the password and the programming code sequence.
Up to 64 digits
Numbers and characters
Up to 100 characters for a maximum of 10 keys, up to 40 characters for additional
keys
The following commands:
Z [number
sequence]:
Number sequence selection including * and #
W [digits 1-5]: Waiting time/pause time of 1-5 seconds
H Hang-up/pick-up with the hook key
C Wait for a connection
Lo The LED next to the function key switches off
Lr The LED next to the function key switches on (red)
Ly The LED next to the function key switches on (yellow)
Lg The LED next to the function key switches on (green)