Operation Manual

COMfortel 1400IP/2600IP/3600IP - Firmware V2.2G - Operation and Configuration V03 07/2015 219
Functions
Pick-Up
Performing Pick-Up
Pick-Up
Using pick-up you can take a call on your own phone that was originally sent to another internal
telephone.
If the call has already been accepted, the call can be picked up using the same procedure
(assuming call pick-up has been permitted by the subscriber being called). This function is
useful when dealing with answering machines, for example.
Performing Pick-Up
Requirements:
– Pick-up permission granted in the PBX
– Telephone is a system telephone on an Auerswald PBX or pick-up is performed on an
Auerswald PBX for which the sequence ##06 has been entered under Settings > Providers
& PBXs > Name of Provider/PBX > Special numbers > Keypad sequence for pickup.
If an internal telephone rings somewhere near you, proceed as described below.
1. Tap on Apps > Functions > Pick-up.
Alternatively, press a function key configured for pick-up.
2. In the Pick-up destination entry field, enter the ringing telephone's internal
telephone number.
Note: If you would like to take a call that is directed to a group, select the pick-
up for the group telephone number.
3. Tap on Execute.
4. Pick up the receiver or tap on .
Pick-Up During a Call
Requirements:
– Pick-up permission granted in the PBX
– A function key configured for pick-up