Operation Manual

228 COMfortel 1400IP/2600IP/3600IP - Firmware V2.2G - Operation and Configuration V03 07/2015
Functions
Relays (System Telephone)
Configuring and Operating a Function Key for Switching Relays
The current settings for the key assignment are shown in the display.
5. In the Description entry field, enter a description for the key. Possible entries:
Note: The key description is used for printing the label and in the display.
6. In the Operation list field, select one of the following options:
7. In the Account list field, select the system telephony account.
8. In the Relay ID entry field, enter the relay telephone number.
9. In the Permission level list field, select one of the following options:
Further steps:
– Save your settings before you leave the screen.
Requirements for using the function:
– The telephone is a system telephone in an Auerswald PBX
– Switching of relay permission granted in the PBX
Using the Telephone to Configure a Function Key for Switching Relays
Requirements:
– The relay in the PBX has been set up with the Configuration-dependent, PC relayor
manual relay operating modes (refer to the PBX manual for different options here)
1. Tap on Apps > Function keys.
Up to 64 digits
Numbers and characters
toggle: Press the key to switch the relay on or off.
switch on: Press the key to switch the relay on.
switch off: Press the key to switch the relay off.
decide each time a key is pressed: Press the key to open the dialogue in
which you select the option.
User: The function key can be changed by users, sub-administrators and
administrators.
Sub-administrator: The function key can only be changed by sub-adminis-
trators and administrators.
Administrator: The function key can only be changed by administrators.