Operation Manual

COMfortel 1400IP/2600IP/3600IP - Firmware V2.2G - Operation and Configuration V03 07/2015 233
Functions
Calling Line Identity Restriction (CLIR)
Configuring and Operating a CLIR Function Key
The list of available functions is displayed.
4. Tap on Calling line identity restriction.
The current settings for assigning the key are shown on the display.
5. In the Description entry field, enter a description for the key. Possible entries:
Note: The key description is used for printing the label and in the display.
6. In the Operation list field, select one of the following options:
7. Tap on Assign.
8. Tap on Exit.
Requirements for using the function:
– Calling Line Identity Restriction (CLIR) supported by the VoIP provider
– Land line connections for the PBX: CLIR 2 service feature (case by case suppression of the
display of the telephone number) activated by the network provider
Up to 64 digits
Numbers and characters
toggle: Press the key to switch Calling Line Identity Restriction (CLIR) on or
off.
switch on: Press the key to switch Calling Line Identity Restriction (CLIR) on.
switch off: Press the key to switch Calling Line Identity Restriction off.