Operation Manual

COMfortel 1400IP/2600IP/3600IP - Firmware V2.2G - Operation and Configuration V03 07/2015 237
Functions
Call Forwarding
Switching Call Forwarding for Subscribers On/Off
• Using the telephone
Requirements:
– for in-house destination numbers: Telephone must be connected to a PBX.
To switch call forwarding for subscribers on or off, press the function key that has been
configured for Call fwd. (scr).
Alternatively, proceed as described below.
1. Tap:
• Functions listed alphabetically: Apps > Functions > Call fwd. (scr.)
• Functions sorted by group: Apps > Functions > Availability >
Call fwd. (scr.)
2. In the Operation list field, select one of the following options:
3. In the Forwarding type list field, select one of the following options:
4. In the Account list field, select the required account.
5. Select the call forwarding destination:
• Manual entry: Enter the destination number in the Forwarding destination entry
field. Possible entries:
Important: Enter telephone numbers exactly as when dialling, for example,
always enter external telephone numbers with a leading exchange line
access number (exception: selected account publ. exchange).
• Selection: Tap on and select the destination number based on its name.
switch on: Switches on call forwarding for subscribers.
switch off: Switches off call forwarding for subscribers. (No further action is
required.)
unconditional: Switches "Call fwd. unconditional" (unconditional call
forwarding) on or off for subscribers.
on busy: Switches "Call fwd. on busy" (call forwarding on busy) on or off for
subscribers.
not responding: Switches call forwarding "on no reply" on or off for
subscribers.
Up to 40 digits
Numbers and the characters * and #