Operation Manual

24 COMfortel 1400IP/2600IP/3600IP - Firmware V2.2G - Operation and Configuration V03 07/2015

Important Information

Proper Use

Important:

The COMfortel 1400 IP, COMfortel 2600 IP and COMfortel 3600 IP are VoIP telephones which

can be run on a local network (LAN), either as Auerswald VoIP system telephones and/or as

standard VoIP telephones.

To operate this as an Auerswald system telephone, you require one of the following Auerswald

PBXs:

• COMpact 4000

• COMpact 5000/R (for COMfortel 3600 IP as of firmware version 6.4D)

• COMpact 5010 VoIP (as of firmware version 4.2F)

• COMmander 6000/R/RX (for COMfortel 2600 IP as of firmware version 6.0C, for COMfortel

3600 IP as of firmware version 6.4D)

• COMmander Basic.2/19" (as of firmware version 4.2F)

• COMmander Business/19" (as of firmware version 4.2F)

The COMfortel 1400/2600/3600 IP can also be used as a standard VoIP telephone in the

following Auerswald PBXs:

• COMpact 3000 analog/ISDN/VoIP

The telephones are intended for use in closed, dry rooms.

Auerswald products are not designed, manufactured, or intended for use or

resale, in environments that require fail-safe performance, such as in the

operation of life-support systems and/or nuclear facilities. Our products can

only be used for these purposes with prior written permission from

Auerswald in each individual case.

Improper use may cause, for example, functional restrictions or inter-

ference, the destruction of the device or, in a worst case scenario, personal

injury.

• If you are still uncertain about how to use the product properly after

reading the section below, please contact your specialised dealer.

• Read the instructions for the device and keep them for future reference.