Operation Manual

COMfortel 1400IP/2600IP/3600IP - Firmware V2.2G - Operation and Configuration V03 07/2015 245
Functions
Call Forwarding
Configuring and Operating a Function Key for Call Forwarding for Subscribers in the PBX
Important: Enter telephone numbers exactly as when dialling, for example,
always enter external telephone numbers with a leading exchange line
access number (exception: selected account publ. exchange).
• Selection: Tap on and select the destination number based on its name.
5. Tap on Execute.
Configuring and Operating a Function Key for Call Forwarding for Subscribers
in the PBX
Press the key to which Call fwd (scr. in PBX) has been assigned to switch call forwarding for
subscribers for the configured destination in the PBX on or off, or toggle it.
The key assigned to switch off all call forwarding for subscribers (Call fwd. (scr.), deactivate
all) switches off call forwarding for subscribers.
In addition, when functions are assigned on the first key level, the status of the function is
indicated by the corresponding LED.
You can configure the function key for call forwarding for subscribers in the PBX as follows:
• Using the configuration manager
• Using the telephone
Using the Configuration Manager to Configure a Function Key for Call Forwarding for
Subscribers in the PBX
1. Open the Apps > Function keys screen.
Up to 40 digits
Numbers and the characters * and #
LED signalling on the key (not applicable if assigned with "disable all"):
red Subscriber call forwarding is enabled for the configured destination.
yellow Subscriber call forwarding is enabled for a different destination.
off Subscriber call forwarding is disabled.