Operation Manual

246 COMfortel 1400IP/2600IP/3600IP - Firmware V2.2G - Operation and Configuration V03 07/2015
Functions
Call Forwarding
Configuring and Operating a Function Key for Call Forwarding for Subscribers in the PBX
2. Only COMfortel 2600/3600 IP: In the Key selection list field, select the key group
whose keys you would like to define.
Note: Keys 16 to 105 are not available until you connect COMfortel
Xtension300 key extension modules (not included in the scope of delivery) to
the telephone.
3. Click one of the following tabs:
4. In the list field next to the function key you would like to define, select the Call fwd
(scr. in PBX) function.
Note: To change the settings for a function key that already has a function
assigned to it, click on that key.
The current settings for the key assignment are shown in the display.
5. In the Description entry field, enter a description for the key. Possible entries:
Note: The key description is used for printing the label and in the display.
6. In the Operation list field, select one of the following options:
7. In the Forwarding type list field, select one of the following options:
8. Enter the destination number in the Forwarding destination entry field. Possible
entries:
Level 1: Keys are assigned on the first key level.
Level 2: Keys are assigned on the second key level.
Up to 64 digits
Numbers and characters
toggle: Press the key to switch call forwarding for subscribers on or off.
switch on: Press the key to switch on call forwarding for subscribers.
switch off: Press the key to switch off call forwarding for subscribers.
unconditional: Assigns the "call forwarding (unconditional)" function to a key
for the subscriber.
on busy: Assigns the "call forwarding (on busy)" function to a key for the
subscriber.
not responding: Assigns the "call forwarding (if not responding)" function to a
key for the subscriber.