Operation Manual

250 COMfortel 1400IP/2600IP/3600IP - Firmware V2.2G - Operation and Configuration V03 07/2015
Functions
Call Forwarding
Configuring and Operating a Function Key for Call Forwarding for External Phone Numbers
5. Enter the PBX's external telephone number that is to be forwarded (without exchange
line access number but with area code), in the Number to forward entry field.
Possible entries:
6. Select the call forwarding destination:
• Manual entry: Enter the destination number in the Forwarding destination entry
field. Possible entries:
Important: Enter telephone numbers exactly as when dialling, for example,
always enter external telephone numbers with a leading exchange line
access number.
• Selection: Tap on and select the destination number based on its name.
7. Tap on Execute.
Configuring and Operating a Function Key for Call Forwarding for External
Phone Numbers
Press the key assigned to Call fwd.: MSN/DDI to switch call forwarding of external telephone
numbers for the configured destination on or off.
In addition, when functions are assigned on the first key level, the status of the function is
indicated by the corresponding LED.
Up to 40 digits
Numbers and the characters * and #
Up to 40 digits
Numbers and the characters * and #
LED signalling on the key:
red In the selected configuration, call forwarding for external telephone numbers
is switched on in the central office/PBX for the configured destination.
yellow Call forwarding for external telephone numbers has been configured for busy
lines or when there is no reply. However, this is overridden by "Call fwd.
unconditional" (unconditional call forwarding) for external telephone numbers.
yellow Call forwarding for external telephone numbers is switched on in the central
office/PBX for a different destination or a different configuration.
off Call forwarding for external telephone numbers is switched off in the central
office/PBX.