Operation Manual

COMfortel 1400IP/2600IP/3600IP - Firmware V2.2G - Operation and Configuration V03 07/2015 251
Functions
Call Forwarding
Configuring and Operating a Function Key for Call Forwarding for External Phone Numbers
Important: When operating the function via the key, the success/failure of the
operation is indicated by a change in colour on the LED. During the configu-
ration in the central office (this takes from a few seconds up to a minute), the
LED blinks yellow.
You configure all forwarding for external telephone numbers as follows:
• Using the configuration manager
• Using the telephone
Using the Configuration Manager to Configure a Function Key for Call Forwarding for
External Phone Numbers
1. Open the Apps > Function keys screen.
2. Only COMfortel 2600/3600 IP: In the Key selection list field, select the key group
whose keys you would like to define.
Note: Keys 16 to 105 are not available until you connect COMfortel
Xtension300 key extension modules (not included in the scope of delivery) to
the telephone.
3. Click one of the following tabs:
4. In the list field next to the function key you want to define, select the Call fwd.: MSN/
DDI function.
Note: To change the settings for a function key that already has a function
assigned to it, click on that key.
The current settings for the key assignment are shown in the display.
5. In the Description entry field, enter a description for the key. Possible entries:
Level 1: Keys are assigned on the first key level.
Level 2: Keys are assigned on the second key level.
Up to 64 digits
Numbers and characters