Operation Manual

256 COMfortel 1400IP/2600IP/3600IP - Firmware V2.2G - Operation and Configuration V03 07/2015
Functions
Control by External Apps
Configuring and Operating a Function Key for Control by External App
Control by External Apps
You can control programmable function keys and the corresponding LEDs by externally
developed apps, e. g. apps for house automation. For information about the available apps
contact your system administrator.
Configuring and Operating a Function Key for Control by External App
Press the key to enable an externally developed app to control the function key and the corre-
sponding LEDs.
In addition, when functions are assigned on the first key level, the status of the function is
indicated by the corresponding LED. For information about LED signalling on a key contact
your system administrator.
You configure the key as follows:
• Using the configuration manager
• Using the telephone
Using the Configuration Manager to Configure a Function Key for Control by External
App
Requirements:
– External app installed on the telephone
1. Open the Apps > Function keys screen.
2. Only COMfortel 2600/3600 IP: In the Key selection list field, select the key group
whose keys you would like to define.
Note: Keys 16 to 105 are not available until you connect COMfortel
Xtension300 key extension modules (not included in the scope of delivery) to
the telephone.
3. Click one of the following tabs:
Level 1: Keys are assigned on the first key level.
Level 2: Keys are assigned on the second key level.