Operation Manual

COMfortel 1400IP/2600IP/3600IP - Firmware V2.2G - Operation and Configuration V03 07/2015 271
Functions
Door Function (System Telephone)
Own Telephone Rings (Door Call) – Opening Door
4. Tap on Execute.
Notes:
The Light on door function switches on the relay of the corresponding door
station separately at the time configured in the PBX.
To establish a call connection with the door station, you must press a
suitably configured speed dialling key.
Own Telephone Rings (Door Call) – Opening Door
You can accept a door call/open the door as follows:
• Using the telephone
Requirements:
– The telephone is a system telephone in an Auerswald PBX
– Telephone number configured in the PBX for the door station
– Relays configured in the PBX for opening the door and the stairwell light.
– Open door permission granted in the PBX
When you receive a door call, open the door by pressing the function key that has been
configured to open the door.
Alternatively, proceed as described below.
• Tap on .
The door is opened.
Note: If the relay of the associated door station is used for switching the
stairwell light, it can be switched on by tapping on within the time
defined in the PBX.