Operation Manual

274 COMfortel 1400IP/2600IP/3600IP - Firmware V2.2G - Operation and Configuration V03 07/2015
Functions
Door Function (System Telephone)
Configuring and Operating a Function Key for the Door Function
Note: The key description is used for printing the label and in the display.
6. In the Operation list field, select one of the following options:
Note: The Light on door function switches on the 3rd relay of the corre-
sponding door station separately at the time configured in the PBX.
7. Enter a telephone number in the Door number entry field. Possible entries:
8. In the Permission level list field, select one of the following options:
Further steps:
– Save your settings before you leave the screen.
Using the Telephone to Configure a Function Key for the Door Function
Requirements:
– Telephone number configured in the PBX for the door station
– Relays configured in the PBX for opening the door and the stairwell light.
1. Tap on Apps > Function keys.
Up to 64 digits
Numbers and characters
open: Press the key to open the door.
switch on light: Press the key to switch the stairwell light on.
open door - switch on light: Press the key to open the door and switch the
stairwell light on.
decide each time a key is pressed: Press the key to open the dialogue in
which you select the option.
Up to 40 digits
Numbers and the characters * and #
User: The function key can be changed by users, sub-administrators and
administrators.
Sub-administrator: The function key can only be changed by sub-adminis-
trators and administrators.
Administrator: The function key can only be changed by administrators.