Operation Manual

COMfortel 1400IP/2600IP/3600IP - Firmware V2.2G - Operation and Configuration V03 07/2015 279

Functions

Waiting Field Function (System Telephone)

Switching Waiting Field Reception On/Off

You can switch waiting field reception on or off as follows:

• Using the telephone

Requirements:

– The telephone has been selected in the PBX as a waiting field reception

In order to switch the waiting field reception on or off, press the function key configured for the

waiting field reception.

Alternatively:

1. Tap on Apps > Functions > Waiting field reception.

2. In the Operation list field, select one of the following options:

Important:

It is only possible to switch a waiting field reception off if no callers are

present in the waiting field. If more than one waiting field reception is in use,

this limitation only applies when only one waiting field reception is switched

on.

When the waiting field reception is switched off, the subscriber is automati-

cally logged out of the waiting field incoming group; the subscriber is

automatically logged on again when the waiting field reception is switched

on again.

3. Tap on Execute.

switch on: Enables the waiting field reception.

switch off: Disables the waiting field reception.