Operation Manual

COMfortel 1400IP/2600IP/3600IP - Firmware V2.2G - Operation and Configuration V03 07/2015 283
Functions
Waiting Field Function (System Telephone)
Configuring and Operating Function Keys for a Shared Line
Using the Telephone to Configure a Function Key for a Shared Line
1. Tap on Apps > Function keys.
2. Press the function key you want to define.
Note: The LEDs of the function keys that are already filled on one level light
up yellow. If a function key is assigned on both levels, the LED is red.
3. Select one of the following options:
The list of available functions is displayed.
Note: The Shared Line function fills both key levels. If one level is filled, the
other levels are also filled automatically.
4. Tap:
• Functions listed alphabetically: Shared Line.
• Functions sorted by group: Exchanges/lines > Shared Line.
The current settings for assigning the key are shown on the display.
5. In the Description entry field, enter a description for the key. Possible entries:
Note: The key description is used for printing the label and in the display.
6. Select the type of shared line from the Shared Line list field.
7. In the Account list field, select the required account.
8. Enter the telephone number of the account in the MSN/URL entry field:
• PBX account: Enter the in-house telephone number in the MSN/URL entry field.
Possible entries:
Level 1: Keys are assigned on the first key level.
Level 2: Keys are assigned on the second key level.
Up to 64 digits
Numbers and characters
Max. 40 digits
Numbers