Operation Manual

286 COMfortel 1400IP/2600IP/3600IP - Firmware V2.2G - Operation and Configuration V03 07/2015
Functions
Waiting Field Function (System Telephone)
Configuring and Operating Function Key for Switching Waiting Field Reception On/Off
Further steps:
– Save your configuration before you leave the screen.
Requirements for using the function:
– The telephone has been selected in the PBX as a waiting field reception
Using the Telephone to Configure a Function Key for Switching Waiting Field Reception
On/Off
1. Tap on Apps > Function keys.
2. Press the function key you want to define.
Note: The LEDs of the function keys that are already filled on one level light
up yellow. If a function key is assigned on both levels, the LED is red.
3. Select one of the following options:
The list of available functions is displayed.
4. Tap:
• Functions listed alphabetically: Waiting field reception.
• Functions sorted by group: Exchange line functions/lines > Waiting
field reception.
The current settings for assigning the key are shown on the display.
5. In the Description entry field, enter a description for the key. Possible entries:
User: The function key can be changed by users, sub-administrators and
administrators.
Sub-administrator: The function key can only be changed by sub-adminis-
trators and administrators.
Administrator: The function key can only be changed by administrators.
Level 1: Keys are assigned on the first key level.
Level 2: Keys are assigned on the second key level.
Up to 64 digits
Numbers and characters