Operation Manual

COMfortel 1400IP/2600IP/3600IP - Firmware V2.2G - Operation and Configuration V03 07/2015 299

Local Answering Machine

Basic Settings

Switching the Separator Tone for New Messages On/Off

If the separator tone is switched on for new messages, you will hear a tone after each message

if you listen to several new messages. This makes it easier to identify the individual messages.

You can switch the separator tone for new messages on or off as follows:

• Using the configuration manager

• Using the telephone

Using the Configuration Manager to Switch the Separator Tone for New Messages On/

Off

Requirements:

– Answering machine (optional, see chapter Important Information > Product Details)

1. Open the Settings > Auerswald > Answering machine > TAM-App screen.

2. Select or clear the Separator tone check box.

Further steps:

– Save your settings before you leave the screen.

Using the Telephone to Switch the Separator Tone for New Messages On/Off

Requirements:

– Answering machine (optional, see chapter Important Information > Product Details)

1. Tap on Apps > Settings > Auerswald > Answering machine.

2. Select or clear the Separator tone check box.

Switches on the separator tone between messages.

Switches off the separator tone between messages.

Switches on the separator tone between messages.

Switches off the separator tone between messages.