Operation Manual

COMfortel 1400IP/2600IP/3600IP - Firmware V2.2G - Operation and Configuration V03 07/2015 303
Local Answering Machine
Readiness
Configuring and Operating a Function Key for Readiness
If readiness is switched on, the symbol appears in the status line.
Further steps:
– Save your settings before you leave the screen.
Using the Telephone to Switch Readiness On/Off
Requirements:
– Answering machine (optional, see chapter Important Information > Product Details)
To switch readiness on or off, press the function key that has been configured for readiness.
Alternatively, proceed as described below.
1. Tap on Apps > Settings > Auerswald > Answering machine.
2. Select or clear the TAM readiness check box.
If readiness is switched on, the symbol appears in the status line.
Configuring and Operating a Function Key for Readiness
Press the key to which TAM readiness has been assigned to switch the readiness of the
answering machine on or off, or toggle it.
In addition, when functions are assigned on the first key level, the status of the function is
indicated by the corresponding LED.
You can configure a function key for readiness as follows:
• Using the configuration manager
• Using the telephone
Enables readiness.
Disables readiness.
LED signalling on the key:
green The readiness of the answering machine is switched on.
off The readiness of the answering machine is switched off.