Operation Manual
310 COMfortel 1400IP/2600IP/3600IP - Firmware V2.2G - Operation and Configuration V03 07/2015
Local Answering Machine
Call Acceptance
Configuring Call Acceptance Rules
Example
The following example illustrates taking the settings into account:
Initial Situation
• Call acceptance and announcements are configured differently for external calls (call type
C), internal calls (call type D) and anonymous calls (call type A).
• The call acceptance rules for calls from a telephone book contact (B) and door calls (E)
have been disabled.
• The announcement and recording rules for miscellaneous calls (F) use the default
announcement.
• The answering machine is switched on.
Call 1
Properties of call 1:
• Caller is an external subscriber who transmits a telephone number.
• The transferred telephone number is entered in the telephone book as a contact.
Sequence for call 1:
• Call type A does not apply because of the current call number presentation.
• No call acceptance rule has been enabled for the first applicable call type B.
• The existing setting for the next applicable call type C is used.
Call 2
Properties of call 2:
• The caller is a door terminal.
Sequence for call 2:
• Call types A to D are not taken into account for door calls.
• The call acceptance rule for call type E is disabled.
• The setting for miscellaneous calls F is used, in this case, this is the Announcement and
recordingsetting with the default announcement.
Configuring Call Acceptance Rules
You can configure call acceptance rules as follows:
• Using the configuration manager