Operation Manual

COMfortel 1400IP/2600IP/3600IP - Firmware V2.2G - Operation and Configuration V03 07/2015 313
Local Answering Machine
Call Acceptance
Configuring and Operating a Function Key for Call Acceptance Rules
4. Depending on the call type, select the required announcement from the
announcement list, as described below.
• All call types except From contact: Tap on Announcement and select the
required announcement.
• Only From contact: Press the Contact/Telephone book key, open the
required contact, press the Menu key and then select the required
announcement in Options > Contact-specific settings > Announcement.
Press the Back key to return to the Settings for call acceptance rules.
The name of the announcement along with the creation date and time is displayed.
5. Depending on the call type, enable the call acceptance rule specified above, if
necessary.
Configuring and Operating a Function Key for Call Acceptance Rules
Press the key to which AB Rufannahme has been designed to enable a call acceptance rule.
In addition, when functions are assigned on the first key level, the status of the function
is?indicated by the corresponding LED.
You can configure a function for call acceptance rules as follows:
• Using the configuration manager
• Using the telephone
Using the Configuration Manager to Configure a Function Key for Call Acceptance Rules
Requirements:
– Answering machine (optional, see chapter Important Information > Product Details)
This enables the call acceptance rule for the relevant call type.
Disables the call acceptance rule for the relevant call type.
LED signalling on the key:
green The call acceptance rule is enabled.
yellow The call acceptance rule is enabled, but call acceptance is different from key
assignment.
off The call acceptance rule is disabled.