Operation Manual

COMfortel 1400IP/2600IP/3600IP - Firmware V2.2G - Operation and Configuration V03 07/2015 321
Local Answering Machine
Call Recording
Configuring and Operating a Function Key for Starting Call Recording
Call recording ends immediately when a query call is begun.
Configuring and Operating a Function Key for Starting Call Recording
Press the key during a call to switch call recording on. Press the key again to switch it off.
In addition, when functions are assigned on the first key level, the status of the function is
indicated by the corresponding LED.
You can configure a function key for starting call recording as follows:
• Using the configuration manager
• Using the telephone
Note: The function can only be set up on a programmable function key that
has an LED (not on a touch function key).
Using the Configuration Manager to Configure a Function Key for Starting Call
Recordings
Requirements:
– Answering machine (optional, see chapter Important Information > Product Details)
1. Open the Apps > Function keys screen.
2. Only COMfortel 2600/3600 IP: In the Key selection list field, select the key group
whose keys you would like to define.
Note: Keys 16 to 105 are not available until you connect COMfortel
Xtension300 key extension modules (not included in the scope of delivery) to
the telephone.
3. Click one of the following tabs:
LED signalling on the key:
red (blinking) The current call is recorded.