Operation Manual

COMfortel 1400IP/2600IP/3600IP - Firmware V2.2G - Operation and Configuration V03 07/2015 323
Local Answering Machine
Call Recording
Switching Automatic Call Recording On/Off
3. Select one of the following options:
The list of available functions is displayed.
4. Tap on:
• Functions listed alphabetically: TAM call recording.
• Functions sorted by group: Answering machine > TAM call recording.
The current settings for assigning the key are shown on the display.
5. In the Description entry field, enter a description for the key. Possible entries:
Note: The key description is used for printing the label and in the display.
6. Tap on Assign.
7. Tap on Exit.
Switching Automatic Call Recording On/Off
If automatic call recording has been enabled, every call (incoming and outgoing) is recorded
completely.
Notes:
Before you record a call you must always obtain the agreement of the call
partner. If you record the call without the knowledge of the communication
partner, you make yourself liable to punishment in law (for breaching the
right to confidentiality of the spoken word). For reasons of data protection,
the call partner should be notified that the call is being recorded by an
announcement.
Recordings whose recording time is shorter than 1 second are not saved.
Automatic call recording ends immediately when a query call is begun.
You can switch automatic call recording on or off as follows:
Level 1: Keys are assigned on the first key level.
Level 2: Keys are assigned on the second key level.
Up to 64 digits
Numbers and characters