Operation Manual

COMfortel 1400IP/2600IP/3600IP - Firmware V2.2G - Operation and Configuration V03 07/2015 325
Local Answering Machine
Call Recording
Configuring and Operating a Function Key for Automatic Call Recording
Configuring and Operating a Function Key for Automatic Call Recording
Press the key to switch the automatic call recording function on or off or to switch it over.
In addition, when functions are assigned on the first key level, the status of the function is
indicated by the corresponding LED.
You can configure a function key for automatic call recording as follows:
• Using the configuration manager
• Using the telephone
Using the Configuration Manager to Configure a Function Key for Automatic Call
Recording
Requirements:
– Answering machine (optional, see chapter Important Information > Product Details)
1. Open the Apps > Function keys screen.
2. Only COMfortel 2600/3600 IP: In the Key selection list field, select the key group
whose keys you would like to define.
Note: Keys 16 to 105 are not available until you connect COMfortel
Xtension300 key extension modules (not included in the scope of delivery) to
the telephone.
3. Click one of the following tabs:
4. In the list field next the function key you want to define, select the TAM automatic call
recording function.
Note: To change the settings for a function key that already has a function
assigned to it, click on that key.
LED signalling on the key:
red Automatic call recording is enabled.
off Automatic call recording is disabled.
Level 1: Keys are assigned on the first key level.
Level 2: Keys are assigned on the second key level.