Operation Manual

COMfortel 1400IP/2600IP/3600IP - Firmware V2.2G - Operation and Configuration V03 07/2015 353
Local Answering Machine
Remote Access
Configuring Remote Access
Configuring Remote Access
Remote access is configured as described below:
• Switch remote access on.
• Enter a remote access pin.
• Configure remote access with quick access. This will simplify remote access for the
user because they will no longer need to enter their remote access PIN. Their
telephone number will be transmitted instead. To do so, enter one or two quick remote
access numbers.
• If you would like the answering machine to notify you as soon as a new message is
present, configure message forwarding and switch it on when required.
Switching Remote Access On/Off
You can switch remote access on or off as follows:
• Using the configuration manager
• Using the telephone
Using the Configuration Manager to Switch Remote Access On/Off
Requirements:
– Answering machine (optional, see chapter Important Information > Product Details)
1. Open the Settings > Auerswald > Answering machine > Answering machine
screen.
2. Select or clear the Remote access check box under Remote access settings.
Further steps:
– Save your settings before you leave the screen.
Enables the remote access function.
Disables the remote access function.