Operation Manual

354 COMfortel 1400IP/2600IP/3600IP - Firmware V2.2G - Operation and Configuration V03 07/2015
Local Answering Machine
Remote Access
Entering the PIN for Remote Access
Using the Telephone to Switch Remote Access On/Off
Requirements:
– Answering machine (optional, see chapter Important Information > Product Details)
To enable or disable the remote access function, press a function key that has been
configured for the remote access function.
Alternatively:
1. Tap on Apps > Settings > Auerswald > Answering machine > Remote
access.
2. Select or clear the Remote access check box.
Entering the PIN for Remote Access
To be able to use the remote access, you must enter a PIN. You can change the PIN at any
time.
Important: When operating as a system telephone on an Auerswald PBX,
the PBX specifies the remote access PIN. The remote access PIN matches
the user PIN entered on the PBX.
You can enter the PIN for remote access as follows:
• Using the configuration manager
• Using the telephone
Using the Configuration Manager to Enter a PIN for Remote Access
Requirements:
– The telephone is not a system telephone in an Auerswald PBX
– Remote access is enabled
1. Open the Settings > Auerswald > Answering machine > Answering machine
screen.
Enables the remote access function.
Disables the remote access function.