Operation Manual

COMfortel 1400IP/2600IP/3600IP - Firmware V2.2G - Operation and Configuration V03 07/2015 357
Local Answering Machine
Remote Access
Performing Remote Access
3. Tap on OK.
4. Tap on Account quick remote access number 1 and select the required account in
the list field.
5. Repeat steps 2 to 4 to enter quick access number 2.
Performing Remote Access
You can perform remote access as follows:
• Using a character string on an external telephone
• Using a character string on an internal telephone
Requirements:
– Remote access is configured
– The internal or external telephone supports DTMF dialling
– You need to know the remote access PIN
– When readiness is switched off on the answering machine: quick access and transfer of a
previously entered quick remote access number by the calling telephone is configured
1. Call the telephone.
After the set call acceptance time, the answering machine takes the call. You hear the
configured announcement.
Note: When quick access is configured you also immediately hear the
announcement for remote access (REMOTE.WAV) and can start remote
access (without entering the PIN).
2. To start the remote access during the announcement, enter the following DTMF
numbers: * Remote access PIN #
Note: If you mistype the remote access PIN you can start again by typing it
again without * (asterisk).
You hear the announcement for remote access (REMOTE.WAV).
3. Execute remote access by entering the following digits.