Manualshelf

Operation Manual

ManualsBrandsAuerswald ManualsTelephonesCOMfortel 2600 IP
351352353354355356357358359360
358 COMfortel 1400IP/2600IP/3600IP - Firmware V2.2G - Operation and Configuration V03 07/2015
Local Answering Machine
Remote Access
Configuring and Operating a Function Key for Remote Access
Configuring and Operating a Function Key for Remote Access
Press the key to which TAM remote access has been assigned to switch the answering
machine's remote access function on or off, or toggle it.
In addition, when functions are assigned on the first key level, the status of the function is
indicated by the corresponding LED.
You can configure a function key for remote access as follows:
• Using the configuration manager
• Using the telephone
Using the Configuration Manager to Configure a Function Key for Remote Access
Requirements:
0 Opens the Help menu.
1 Opens the main menu.
2 Replays new messages.
3 Replays all the messages.
4 Jumps back to the previous recording.
5 Repeats the recording currently being played back.
6 Jumps to the next recording.
7 Deletes the recording currently being played back.
8 Ends playback.
* 10: Switches the answering machine off.
* 11: Switches the answering machine on.
* 70: Deletes all the recordings.
* 99: Records a voice memo. Ring off to save the memo or press #. To cancel,
press *.
Disconnect: Ends remote access.
LED signalling on the key:
green Remote access to the answering machine is switched on.
off Remote access to the answering machine is switched off.