Operation Manual

396 COMfortel 1400IP/2600IP/3600IP - Firmware V2.2G - Operation and Configuration V03 07/2015
Voice Mailboxes on the PBX
Basic Settings
Switching Automatic Playback On/Off
Basic Settings
The base functionality of the voice mail/fax box includes settings that you can modify to suit
your own requirements base, as described below.
Switching Automatic Playback On/Off
If the automatic playback of messages and voice memos is switched on, the new recordings
start playing automatically as soon as you open the message list.
You can switch automatic playback on or off as follows:
• Using the configuration manager
• Using the telephone
Note: The Automatic replay of new messages voice mailbox setting in the
PBX's configuration manager refers to playing back messages by remote
access and not via the telephone's message list.
Using the Configuration Manager to Switch Automatic Playback On/Off
Requirements:
– The telephone is a system telephone in an Auerswald PBX
– The voice mailbox has been configured and assigned in the Auerswald PBX
1. Open the Settings > Auerswald > Answering machine > TAM-App screen.
2. Under TAM-App Configuration, enable or clear the Automatic playback check box.
Further steps:
– Save your settings before you leave the screen.
Using the Telephone to Switch Automatic Playback On/Off
Requirements:
Switches automatic playback on.
Switches automatic playback off.