Operation Manual

398 COMfortel 1400IP/2600IP/3600IP - Firmware V2.2G - Operation and Configuration V03 07/2015
Voice Mailboxes on the PBX
Basic Settings
Switching the Separator Tone On/Off
Further steps:
– Save your settings before you leave the screen.
Using the Telephone to Switch Call Information On/Off
Requirements:
– The telephone is a system telephone in an Auerswald PBX
– The voice mailbox has been configured and assigned in the Auerswald PBX
1. Open the message list of the voice mailbox.
2. Press the Menu key.
3. Tap on Settings.
4. Select or clear the Call information check box.
Note: Alternatively tap on Apps > Settings > Auerswald >
Answering machine and select or clear the Call information check box.
Switching the Separator Tone On/Off
If the separator tone is switched on, you will hear a tone after each message if you listen to
several new messages. This makes it easier to identify the individual messages.
You can switch the separator tone on or off as follows:
• Using the configuration manager
• Using the telephone
Using the Configuration Manager to Switch the Separator Tone for New Messages On/
Off
Requirements:
– The telephone is a system telephone in an Auerswald PBX
Switches on the date and time display before the message/voice memo.
Switches off the date and time display before the message/voice memo.