Operation Manual

COMfortel 1400IP/2600IP/3600IP - Firmware V2.2G - Operation and Configuration V03 07/2015 399
Voice Mailboxes on the PBX
Basic Settings
Switching the Separator Tone On/Off
– The voice mailbox has been configured and assigned in the Auerswald PBX
1. Open the Settings > Auerswald > Answering machine > TAM-App screen.
2. Under TAM-App Configuration, enable or clear the Separator tone check box.
Further steps:
– Save your settings before you leave the screen.
Using the Telephone to Switch the Separator Tone for New Messages On/Off
Requirements:
– The telephone is a system telephone in an Auerswald PBX
– The voice mailbox has been configured and assigned in the Auerswald PBX
1. Open the voice mailbox's message list.
2. Press the Menu key.
3. Tap on Settings.
4. Select or clear the Separator tone check box.
Note: Alternatively tap on Apps > Settings > Auerswald >
Answering machine and enable or clear the Separator tone check box.
Switches on the separator tone between messages.
Switches off the separator tone between messages.
Switches on the separator tone between messages.
Switches off the separator tone between messages.