Operation Manual

400 COMfortel 1400IP/2600IP/3600IP - Firmware V2.2G - Operation and Configuration V03 07/2015
Voice Mailboxes on the PBX
Automatic Operation
Switching On Automatic Operation
Automatic Operation
In automatic operation mode, the voice mail/fax box is switched to the state of readiness (On,
Off or Depending on configuration) specified in the PBX configuration.
Switching On Automatic Operation
If you have used VMB readiness to switch a voice mail/fax box on or off, independently of the
PBX configuration, you can use this function to reset the box to the PBX configuration and the
state of readiness specified there.
You can switch the automatic operation of a voice mailbox on or off as follows:
• Using the telephone
Requirements:
– The voice mail/fax box has been configured and assigned in the PBX
To switch on automatic operation, press the function key that has been configured for
automatic operation.
Alternatively, proceed as described below.
1. Tap:
• Functions listed alphabetically: Apps > Functions > VMB Automatic
Operation
• Functions sorted by group: Apps > Functions > Voice mailbox >
VMB Automatic Operation.
2. In the VMB number entry field, enter the box's telephone number.
3. Tap on Execute.
The box is now in automatic operation and adopts the state of readiness already
predefined by the PBX.