Operation Manual

402 COMfortel 1400IP/2600IP/3600IP - Firmware V2.2G - Operation and Configuration V03 07/2015
Voice Mailboxes on the PBX
Automatic Operation
Configuring and Operating a Function Key for Automatic Operation
3. Click one of the following tabs:
4. In the list field next to the function key you want to assign, select the VMB automatic
mode function.
Note: To change the settings for a function key that already has a function
assigned to it, click on that key.
The current settings for the key assignment are shown in the display.
5. In the Description entry field, enter a name for the key. Possible entries:
Note: The key name is used for printing the label.
6. In the Account list field, select the system telephony account.
7. In the VMB telephone number entry field, enter the telephone number of the voice
mailbox which is to be switched with the function key.
8. In the Permission level list field, select one of the following options:
Further steps:
– Save your settings before you leave the screen.
Requirements for using the function:
– The telephone is a system telephone in an Auerswald PBX
Using the Telephone to Configure a Function Key for Automatic Operation
Requirements:
Level 1: Keys are assigned on the first key level.
Level 2: Keys are assigned on the second key level.
Up to 64 digits
Numbers and characters
User: The function key can be changed by users, sub-administrators and
administrators.
Sub-administrator: The function key can only be changed by sub-adminis-
trators and administrators.
Administrator: The function key can only be changed by administrators.