Operation Manual

406 COMfortel 1400IP/2600IP/3600IP - Firmware V2.2G - Operation and Configuration V03 07/2015
Voice Mailboxes on the PBX
Readiness
Configuring and Operating a Function Key for Readiness
Note: Keys 16 to 105 are not available until you connect COMfortel
Xtension300 key extension modules (not included in the scope of delivery) to
the telephone.
3. Click one of the following tabs:
4. In the list field next to the function key you want to assign, select the VMB readiness
function.
Note: To change the settings for a function key that already has a function
assigned to it, click on that key.
The current settings for the key assignment are shown in the display.
5. In the Description entry field, enter a name for the key. Possible entries:
Note: The key name is used for printing the label.
6. In the Operation list field, select one of the following options:
7. In the Readiness list field, select one of the following options:
8. In the Account list field, select the system telephony account.
9. In the VMB number entry field, enter the telephone number of the box which is to be
switched with the function key.
10. In the Permission level list field, select one of the following options:
Level 1: Keys are assigned on the first key level.
Level 2: Keys are assigned on the second key level.
Up to 64 digits
Numbers and characters
toggle: Press the key to enable or disable the box depending on its status.
switch on: Press the key to enable the box.
switch off: Press the key to disable the box.
decide each time a key is pressed: Press the key to open the dialogue in
which you select the option.
permanently: Press the key to permanently enable the box.
temporary: Press the key to temporarily enable the box until the configuration
is switched by the PBX.