Operation Manual

408 COMfortel 1400IP/2600IP/3600IP - Firmware V2.2G - Operation and Configuration V03 07/2015
Voice Mailboxes on the PBX
Readiness
Configuring and Operating a Function Key for Readiness
Note: The key description is used for printing the label and in the display.
6. In the Operation list field, select one of the following options:
7. In the Readiness list field, select one of the following options:
8. In the Account list field, select the system telephony account.
9. In the VMB telephone number entry field, enter the telephone number of the box
which is to be switched with the function key.
10. Tap on Assign.
11. Tap on Exit.
Requirements for using the function:
– The telephone is a system telephone in an Auerswald PBX
toggle: Press the key to enable or disable the box depending on its status.
switch on: Press the key to enable the box.
switch off: Press the key to disable the box.
decide each time a key is pressed: Press the key to open the dialogue in
which you select the option.
permanently: Press the key to permanently enable the box.
temporary: Press the key to temporarily enable the box until the configuration
is switched by the PBX.