Operation Manual

COMfortel 1400IP/2600IP/3600IP - Firmware V2.2G - Operation and Configuration V03 07/2015 425
Voice Mailboxes on the PBX
Remote Access
Switching Remote Access On/Off
Note: By dialling 9 while a message is being replayed, the telephone number
of the caller will be displayed—provided it has been transferred. By pressing
the # key, you can initiate a callback to the caller's telephone number.
Switching Remote Access On/Off
You can switch remote access on or off as follows:
• Using the telephone
Requirements:
– The telephone is a system telephone in an Auerswald PBX
8 Ends playback.
* 10: Disables the voice mailbox.
* 11: Enables the voice mailbox.
* 20: Enables you to record and change to different announcements.
Note: The default announcement and your announcements
are played, if present. The following functions are available
whilst your own announcements are being played back:
#: Selects the announcement currently being played as an
active announcement.
4: Jumps back to the previous announcement.
5: Repeats the announcement currently being played.
6: Jumps to the next announcement.
7 Selects the announcement that is currently being played,
so you can change it or record it. Press # to save your
announcement, or * to exit the function.
* 30: Disables message forwarding.
* 31: Enables message forwarding.
* 70: Deletes all messages and voice memos.
* 99: Records a voice memo.
Disconnect: Ends remote access.