Operation Manual

426 COMfortel 1400IP/2600IP/3600IP - Firmware V2.2G - Operation and Configuration V03 07/2015
Voice Mailboxes on the PBX
Remote Access
Configuring and Operating a Function Key for Remote Access
– The voice mailbox has been configured and assigned in the PBX
To enable or disable the remote access function, press a function key that has been
configured for the remote access function.
Alternatively:
1. Tap:
• Functions listed alphabetically: Apps > Functions > VMB remote
access
• Functions sorted by group: Apps > Functions > Voice mailbox >
VMB remote access.
2. In the Operation list field, select one of the following options:
3. In the VMB number entry field, enter the voice mailbox's telephone number.
4. Tap on Execute.
Configuring and Operating a Function Key for Remote Access
Press the key generally assigned for VMB remote access to enable, disable or switch the
function for remotely accessing a voice mailbox.
Press the key specifically assigned for VMB remote access to enable, disable or toggle the
remote access function.
In addition, when functions are assigned on the first key level, the status of the function is
indicated by the corresponding LED.
You can configure a function key for remote access as follows:
• Using the configuration manager
switch on: Enables the remote access function.
switch off: Disables the remote access function.
LED signalling on the key:
green Voice mailbox remote access is enabled (for a defined assignment).
off Remote access is disabled.
The function key has no defined assignment.