Operation Manual

COMfortel 1400IP/2600IP/3600IP - Firmware V2.2G - Operation and Configuration V03 07/2015 429
Voice Mailboxes on the PBX
Remote Access
Configuring and Operating a Function Key for Remote Access
• Functions listed alphabetically: VMB remote access.
• Functions sorted by group: Voice mailbox > VMB remote access.
The current settings for assigning the key are shown on the display.
5. In the Description entry field, enter a description for the key. Possible entries:
Note: The key description is used for printing the label and in the display.
6. In the Operation list field, select one of the following options:
7. In the Account list field, select the system telephony account.
8. In the VMB number entry field, enter the voice mailbox's telephone number.
9. Tap on Assign.
10. Tap on Exit.
Requirements for using the function:
– The telephone is a system telephone in an Auerswald PBX
Up to 64 digits
Numbers and characters
toggle: Press the key to enable or disable remote access dependent on its
status.
switch on: Press the key to enable remote access.
switch off: Press the key to disable remote access.
decide each time a key is pressed: Press the key to open the dialogue in
which you select the options.