Operation Manual

440 COMfortel 1400IP/2600IP/3600IP - Firmware V2.2G - Operation and Configuration V03 07/2015
Voice Mailboxes on the PBX
Message List
Configuring and Operating a Function Key for Opening a Message List
Note: The LEDs of the function keys that are already filled on one level light
up yellow. If a function key is assigned on both levels, the LED is red.
3. Select one of the following options:
The list of available functions is displayed.
4. Tap:
• Functions listed alphabetically: VMB open.
• Functions sorted by group: Voice mailbox > VMB open.
The current settings for assigning the key are shown on the display.
5. In the Description entry field, enter a description for the key. Possible entries:
Note: The key description is used for printing the label and in the display.
6. In the Account list field, select the system telephony account.
7. In the VMB telephone number entry field, enter the telephone number of the box
which is to be switched with the function key.
8. Tap on Assign.
9. Tap on Exit.
Requirements for using the function:
– The telephone is a system telephone in an Auerswald PBX
Level 1: Keys are assigned on the first key level.
Level 2: Keys are assigned on the second key level.
Up to 64 digits
Numbers and characters