Operation Manual

454 COMfortel 1400IP/2600IP/3600IP - Firmware V2.2G - Operation and Configuration V03 07/2015
Settings
Providers and PBXs
New Provider/PBX
Important:
New Provider/PBX
Some providers/PBXs are already pre-configured in the factory settings. In total you can
configure up to 10 providers/PBXs.
Do so as follows:
• Using the configuration manager
• Using the telephone
Using the Configuration Manager to Create a Provider/PBX
1. Open the Settings > Providers & PBXs screen.
2. Click on New.
3. Select the required profile from the Profile list field.
The configuration screen for the provider/PBX opens.
Further steps:
– Make further settings on the configuration screen.
Note: You will receive the settings data directly from your provider.
– Save your settings before you leave the screen.
To support the system telephone, the PBX needs at least the following
firmware versions:
• COMpact 5010 VoIP, COMpact 5020 VoIP, COMmander Basic.2/19",
COMmander Business/19": 4.2F
• COMpact 4000, COMpact 5000/R: 6.4D
• COMmander 6000/R/RX: 6.0C