Operation Manual

COMfortel 1400IP/2600IP/3600IP - Firmware V2.2G - Operation and Configuration V03 07/2015 457
Settings
Providers and PBXs
Configuring the VoIP Provider or PBX Type
2. In the line that contains the provider/PBX, click Configure.
The provider/PBX configuration screen opens.
3. Enter the name of the provider/PBX in the Name entry field under Providers &
exchange systems settings. Possible entries:
Further steps:
– Save your settings before you leave the screen.
Using the Telephone to Enter a Name for the Provider/PBX
1. Tap on Apps > Settings > Providers & PBXs.
2. Tap on the name of the provider/PBX.
3. Tap on Name and then enter the name of the provider/PBX in the entry field. Possible
entries:
4. Tap on OK.
Configuring the VoIP Provider or PBX Type
When you configure the provider/PBX you can also select the type of the PBX or VoIP
provider.
You can configure the VoIP Provider or PBX Type as follows:
• Separately for the provider or PBX
• Using the telephone
Requirements:
– Auerswald profile not selected
1. Tap on Apps > Settings > Providers & PBXs.
2. Tap on the name of the provider/PBX.
Up to 64 digits
Numbers and characters
Up to 64 digits
Numbers and characters