Operation Manual

462 COMfortel 1400IP/2600IP/3600IP - Firmware V2.2G - Operation and Configuration V03 07/2015
Settings
Providers and PBXs
Configuring the Outbound Proxy
Using the Configuration Manager to Configure the Outbound Proxy
Requirements:
– Set DNS server
1. Open the Settings > Providers & PBXs screen.
2. In the line that contains the provider/PBX, click on Configure.
The provider/PBX configuration screen opens.
3. Under Outbound proxy, select one of the following options:
4. Under Outbound proxy, enter the outbound proxy in the Outbound proxy IP/URL
entry field. Possible entries:
5. Under Outbound proxy, enter the port number in the Outbound proxy port entry
field. Possible entries:
Note: The port 5060 is configured in the factory settings.
Further steps:
– Save your settings before you leave the screen.
Using the Telephone to Configure the Outbound Proxy
Requirements:
– Set DNS server
1. Tap on Apps > Settings > Providers & PBXs.
2. Tap on the name of the provider/PBX.
Outbound proxy is disabled: Disables the outbound proxy. (No further action
is required.)
Outbound proxy assigned automatically: Automatically determines an
outbound proxy. (No further action is required.)
Outbound proxy assigned manually: Enables you to enter an outbound
proxy.
IP address with a range of 0 to 255 (example: 123.123.123.123)
URL (example: www.outboundproxy.uk)
1 to 65535