Operation Manual

COMfortel 1400IP/2600IP/3600IP - Firmware V2.2G - Operation and Configuration V03 07/2015 463
Settings
Providers and PBXs
Configuring the SIP Port
3. Under SIP settings, tap on Outbound proxy.
4. In the Outbound proxy list field, select one of the following options:
5. Tap on Outbound proxy IP/URL and then enter the outbound proxy in the entry field.
Possible entries:
6. Tap on OK.
7. Tap on Outbound proxy port and then enter the port number (Port) in the entry field.
Possible entries:
8. Tap on OK.
Configuring the SIP Port
The SIP port is a port on the local system that is used as a starting point for the SIP transfer.
Note: A different SIP port must be specified for each provider/PBX.
You can configure the SIP port as follows:
• Separately for the provider or PBX
• Using the configuration manager
• Using the telephone
Using the Configuration Manager to Configure the SIP Port
1. Open the Settings > Providers & PBXs screen.
Outbound proxy is disabled: Disables the outbound proxy. (No further action
is required.)
Outbound proxy assigned automatically: Automatically determines an
outbound proxy. (No further action is required.)
Outbound proxy assigned manually: Enables you to enter an outbound
proxy.
IP address with a range of 0 to 255 (example: 123.123.123.123)
URL (example: www.outboundproxy.uk)
1 to 65535