Operation Manual

468 COMfortel 1400IP/2600IP/3600IP - Firmware V2.2G - Operation and Configuration V03 07/2015
Settings
Providers and PBXs
Configuring SIPS and Switching It On/Off
1. Open the Settings > Providers & PBXs screen.
2. In the line that contains the provider/PBX, click Configure.
The provider/PBX configuration screen opens.
3. Click on the SIP tab.
4. Select or clear the Session Initiation Protocol Security (SIPS) check box under
Security.
5. Configure the settings you want:
• PBX account: Under Security, enter the fingerprint in the Fingerprint for SIPS
certificate entry field.
Note: If you have saved a root certificate for encrypting calls in your PBX, this
is uploaded automatically to the telephone. You must enter the root certificate
fingerprint in the telephone so that the root certificate can be verified.
• SIP account: Under Certificate upload, tap on Select, select the required file,
click Open and then click Save.
Further steps:
– Save your settings before you leave the screen.
Using the Telephone to Configure SIPS and Switch It On/Off
Requirements:
–SIP account: SD card inserted into slot
–SIP account: A certificate, saved in the root directory of the SD card
1. Tap on Apps > Settings > Providers & PBXs.
2. Tap on the name of the provider/PBX.
3. Under SIP settings, tap on SIP.
4. Select or clear the Session Initiation Protocol Security (SIPS) check box under
Security.
Switches SIPS on.
Switches SIPS off. (No further action is required.)