Operation Manual

COMfortel 1400IP/2600IP/3600IP - Firmware V2.2G - Operation and Configuration V03 07/2015 483
Settings
Providers and PBXs
Entering Exchange Line Access Numbers
2. In the line that contains the provider/PBX, click Configure.
The provider/PBX configuration screen opens.
3. Click on the Numbers tab.
4. Under Special numbers, select or clear the Use of public exchange subscriber
numbers check box.
Further steps:
– Save your settings before you leave the screen.
Using the Telephone to Switch the Use of Exchange Line Numbers On/Off
Requirements:
– Not operable on Auerswald PBXs
– Set type PBX
1. Tap on Apps > Settings > Providers & PBXs.
2. Tap on the name of the provider/PBX.
3. Under Number settings, tap on Special numbers.
4. Select or clear the Use of public exchange subscriber numbers check box.
Entering Exchange Line Access Numbers
The exchange line access number is required to request an external line via the account Publ.
exchange.
Switches the use of exchange call numbers on.
Switches the use of exchange call numbers off.
Switches the use of exchange line numbers on.
Switches the use of exchange line numbers off.