Operation Manual

484 COMfortel 1400IP/2600IP/3600IP - Firmware V2.2G - Operation and Configuration V03 07/2015
Settings
Providers and PBXs
Entering Exchange Line Access Numbers
Note:
After you dial the exchange line access number, the external dial tone
indicates that an external line is free. The external telephone number can
then be dialled.
You can also request an exchange line from the telephony app. Tap on
to display the list of external contacts and dial an external account
(public exchange). Tap on to display the list of internal contacts. Only
internal telephone numbers can be dialled.
You can enter an exchange line access number as follows:
• Separately for the provider or PBX
• Using the configuration manager
• Using the telephone
Using the Configuration Manager to Enter Exchange Line Access Numbers
1. Open the Settings > Providers & PBXs screen.
2. In the line that contains the provider/PBX, click Configure.
The provider/PBX configuration screen opens.
3. Click on the Numbers tab.
4. Under Special numbers, enter the exchange line access number in the Exchange
line access number entry field. Possible entries:
Note: In the factory settings, the PBX's exchange line access number is "0",
but it can be changed in some PBXs (refer to the instructions for the PBX).
Further steps:
– Save your settings before you leave the screen.
Using the Telephone to Enter Exchange Line Access Numbers
1. Tap on Apps > Settings > Providers & PBXs.
Numbers